Novemila series

A wide range of professional spray guns including HVLP, HTE and Special Series systems. The HVLP version, enhanced and enriched by the new high pulverising “TOP HVLP”cap, offers high performance in terms of fan and atomization while still maintaining the HVLP work parameters (0,7 bar output at cap, transfer effi ciency > 65%). Equipped with a pressure regulator and pressure gauge for correct spray gun use according to regulatory standards.
The reduced air consumption, just over 200 l/min, combined with 25% higher savings than more traditional systems, make this spray gun one of the most popular and appreciated on the market. The HTE version, equipped with a new highly pulverising “TOP HTE” cap, still working at pressures higher than the HVLP system, maintains the reduced air consumption and high transfer effi ciency features. Furthermore, the new cap improves fan and product atomization performance. The versatility of this spray gun allows for its use in various sectors where a high level of paint product atomization is required.
The product passage made of stainless steel allows for the use of water-based paints, increasingly more popular on the market.
The range also includes a series of spray guns dedicated to Special applications for use in various and critical sectors: from construction to furniture manufacture, from woodworks to the nautical sector.
Glue, mural paints, Gel-coat tixotropic products are just some examples of products that can be applied with these spray guns.

Serie NOVEMILA Serie NOVEMILA

 

packaging

Packaging

All spray guns of the Novemila series are supplied in handy rigid plastic suitacases containing all the accessories for a correct cleaning and maintenance.

9011 HVLP

Tank: Nylon 680 cc
Body: chemical nickel-plated polished aluminium
Top HVLP cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 940 g
Working pressure: 2,0 bar
Air consumption: 220 l/min
Nozzle Ø: 1,3 - 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Ref. 210

9011 HVLP

Recommended use:

Body shop Industry Woodworking

9010 HVLP

Camlock suction cup: aluminium 1000 cc
Body: chemical nickel-plated polished aluminium
TOP HVLP Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 1,15 Kg
Working pressure: 2,0 bar
Air consumption: 220 l/min
Nozzle Ø: 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Air inlet pressure regulator with pressure gauge

Ref. 215

9010 HVLP

Reccomended use:

Body shop Building Woodworking

9010 HVLP

Bayonet suction cup: aluminium 1000 cc
Body: chemical nickel-plated polished aluminium
TOP HVLP Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 1,18 Kg
Working pressure: 2,0 bar
Air consumption: 220 l/min
Nozzle Ø: 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Air inlet pressure regulator with pressure gauge

Ref. 216

9010 HVLP

Recommended use:

Body shop Building Woodworking

9010/SP HVLP

To be used through pressurized containers, low pressure pumps - Product inlet M1/4”
Body: chemical nickel-plated polished aluminium
TOP HVLP Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 755 g
Working pressure: 2,0 bar
Air consumption: 220 l/min
Nozzle Ø: 1,0 - 1,3 - 1,5 - 1,7 - 1,9 - 2,2 - 2,5

TOP air inlet pressure regulator with pressure gauge

Ref. 217

9010/SP HVLP

Recommended use:

Body shop Industry woodworking

9011 HTE

Tank: Nylon 680 cc
Body: chemical nickel-plated polished aluminium
TOP HTE Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 755 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 180 - 220 l/min
Nozzle Ø: 1,3 - 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Ref. 230

9011 HTE

Recommended use:

Body shop Industry Woodworking

9010 HTE

Camlock suction cup: aluminium 1000 cc
Body: chemical nickel-plated polished aluminium
TOP HTE Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 990 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 220 - 240 l/min
Nozzle Ø: 1,3 - 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Ref. 235

9010 HTE

Recommended use:

body shop industry woodworking

9010/SP HTE

To be used through pressurized containers, low pressure pumps - Product inlet M1/4”
Body: chemical nickel-plated polished aluminium
TOP HTE Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Weight: 590 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 220 - 240 l/min
Nozzle Ø: 1,0 - 1,3 - 1,5 - 1,7 - 1,9 - 2,2 - 2,5

Ref. 237

9010/SP HTE

Recommended use:

Body shop Industry woodworking

9010 ECOMIX

Adjustable suction pressure bayonet tank: 1000 cc stainless steel
Body: chemically nickel plated polished aluminium
Cap: chemically nickeled brass
Needle-nozzle-springs: stainless steel
Adjustments: air-product-fan
Cup gasket o-ring in EPDM
Use: application of wall paints in the building sector
Weight: 940 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 200 - 240 l/min
Nozzle Ø: 2,2 - 2,5 - 3,0

Equipped with regulator group of the air inlet fl ow and air pressure to the tank

Ref. 250

9010 ECOMIX

Recommended use:

Building

9010/SP ECOMIX

To be used through pressurized containers, low pressure pumps - Product inlet M1/4”
Body: chemically nickel plated polished aluminium
Cap: chemically nickeled brass
Needle-nozzle-springs: stainless steel
Adjustments: air-product-fan
Use: application of wall paints in the building sector
Weight: 610 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 200 - 240 l/min
Nozzle Ø: 2,2 - 2,5 - 3,0

Ref. 251

9010/SP ECOMIX

Recommended use:

Building

9011 HD

Tank: nylon 680 cc
Body: chemically nickel plated polished aluminium
Cap: chemically nickeled brass
Needle-nozzle-springs: stainless steel
Adjustments: air-product-fan
Weight: 1,25 kg
Working pressure: 2,5 - 3,0 bar
Air consumption: 220 - 240 l/min
Nozzle Ø: 1,5 - 1,9 - 2,2 - 2,5

Double spray gun air inlet pressure regulator and pressurised tank with pressure gauge

Ref. 233

9011 HD

Recommended use:

Building woodworking

9011/SP COLLA

To be used through pressurized containers, low pressure pumps - Product inlet M1/4”
Body: chemically nickel plated polished aluminium
Cap: chemically nickeled brass
Needle-nozzle-springs: stainless steel
Adjustment: product-fan
Weight: 905 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 180 - 240 l/min
Nozzle Ø: 1,7 - 1,9

Ref. 253

9010/SP COLLA

Recommended use:

Industry Woodworking

9011 GEL COAT

Tank nylon 680 cc
Body: chemical nickel-plated polished aluminium
Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Use: for application of Gel Coat and dense products generally
Weight: 810 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 180 - 220 l/min
Nozzle Ø: 3,0 - 4,0 - 5,0

Ref. 256

9011 GEL COAT

Recommended use:

Body shop Industry woodworking

9010/SP GEL COAT

To be used through pressurized containers, low pressure pumps - Product inlet M1/4”
Body: chemical nickel-plated polished aluminium
Cap: chemical nickel-plated brass
Needle-spring-nozzle: stainless steel
Adjustments: air-product-fan
Use: for application of Gel Coat and dense products generally
Weight: 590 g
Working pressure: 2,5 - 3,0 bar
Air consumption: 180 - 240 l/min
Nozzle Ø: 3,0 - 4,0 - 5,0

Ref. 256

9010/SP GEL COAT

Recommended use:

Body shop Industry woodworking